Open and airy, classic style Crete Panorama 10 (3.8 m x 2.8 m) with panoramic windows and doors is perfect for those looking for a quality Home office, pool house or recreational space. This timber studio will easily fit into any backyard adding extra space to flow seamlessly from the main house through outdoors. Crete Panorama 10 cabin has a floor of less than 10 m² and may be built without council permission in NSW, ACT, QLD, VIC, SA and TAS. Featuring double glazing on French doors and windows, this model is the easiest to install, and any handyman should DIY assemble it in just 1 day on a prepared level base.
STRUCTURAL COMPONENTS MADE IN EU
Every YZY Kit Homes backyard cabin becomes unique with the flexible options and colours of your choice and yet cost-effective as the structure of the building is pre-cut at the factory in EU.
- Structure with external and internal walls, kiln-dried 45mm Nordic Spruce
- Roof structure 3 LGL load-bearing rafters, thickness 60mm, h = 140mm
- 20mm T&G ceiling boards (made in sheets approx 900mm)
- Ceiling trimmings
- Fascia boards
- 10 pre-drilled channels, 2 for electricity and 8 for the structural tie-down system, 18mm Ø
- External timber Double Glazed doors and windows:
- 1 external French doors, w1400 x h1950mm, safety DG glass
- 2 fixed windows, w650 x h1950mm, safety DG glass
- 2 tilt&turn windows, w560 x h1070mm, customizable placement
- the door and windows are already installed into the timber frames with architraves
- All hardware
- Drawings for assembly with all boards marked
- Set of drawings including generic engineering and structural certificate
- Walkthrough 360-degree interactive 3D model, online viewer
FLEXIBLE COMPONENTS SOURCED FROM AU
Flexible components are sourced locally, so your local builder could customize the parts to suit your taste and budget.
To build a cabin to the lockup stage, the following is required:
- Timber or steel sub-floor with yellow tongue flooring or a slab base
- Tie-down steel rods
- Colorbond roofing (colour of your choice) with insulation
- Gutters and downpipes
To build a cabin to the turnkey stage, the following is required.
- Veranda/decking (can be the custom size)
- Timber Handrail and external steps (optional)
- Internal lining and/or external cladding (optional)
- The flooring coverings of your choice
- Bathroom fit-out
- Kitchen fit-out
- Electrical
- Plumbing
- Painting
FLEXIBLE FLOOR PLAN AND BUILDING DESIGN
- Floor plan can be mirror reversed during installation
- Windows marked red on the floor plan can be placed in your
preferred location during installation
If you need any changes to our standard range of cabins or wish to make your own design come to life, bring it on!
