Classic style Corsica 30 (5.6 m x 5.6 m) is a 1 bedroom cabin featuring high ceilings and covered front deck area to sit back and relax. This traditional style cottage is a perfect solution for any Australian backyard. Corsica 30 is ideal for a stay-at-home children Family Home, Parents Retreat or can be an ultimate Teenage Studio. Or Corsica 30 can be your perfect getaway – close the door and enjoy the silence as cabin features double glazing on doors and windows. Constructed on a prepared level base, Corsica 30 timber studio can be assembled in 2 days.
* Order must be placed for mirrored floor plan, estimated lead time is 16–18 weeks
STRUCTURAL COMPONENTS MADE IN EU
Every YZY Kit Homes backyard cabin becomes unique with the flexible options and colours of your choice and yet cost-effective as the structure of the building is pre-cut at the factory in EU.
- Structure with external and internal walls, kiln-dried 45mm Nordic Spruce
- Roof structure 7 LGL load-bearing rafters, thickness 90mm, h = 175mm
- 20mm T&G ceiling boards (made in sheets approx 900mm)
- Ceiling trimmings
- Fascia boards
- Timber covers for all external corner nibs
- 21 pre-drilled channels, 8 for electricity and 13 for the structural tie-down system, 18mm Ø
- 12 sliding battens – system for bathroom internal lining, h=2400mm, 32mm depth x 60mm width
- External timber Double Glazed doors and windows:
- 1 External entry doors, w1000 x h2080mm, safety DG glass
- 2 tilt&turn windows, w1000 x h1520mm
- 1 tilt&turn window, w1000 x h1060mm
- 1 tilt&turn window, w560 x h1060mm, customizable placement
- 1 horizontal tilt window, w1800 x h600mm, customizable placement
- the door and windows are already installed into the timber frames with architraves
- 2 internal sliding timber doors, w820 x h2000 (sliding hardware not included)
- All hardware
- Drawings for assembly with all boards marked
- Set of drawings including generic engineering and structural certificate
- Walkthrough 360-degree interactive 3D model, online viewer
FLEXIBLE COMPONENTS SOURCED FROM AU
Flexible components are sourced locally, so your local builder could customize the parts to suit your taste and budget.
To build a cabin to the lockup stage, the following is required:
- Timber or steel sub-floor with yellow tongue flooring or a slab base
- Tie-down steel rods
- Colorbond roofing (colour of your choice) with insulation
- Gutters and downpipes
- Sliding door tracks for 2 internal doors
To build a cabin to the turnkey stage, the following is required.
- Veranda/decking (can be the custom size)
- Timber Handrail and external steps (optional)
- Internal lining and/or external cladding (optional)
- The flooring coverings of your choice
- Bathroom fit-out
- Kitchen fit-out
- Electrical
- Plumbing
- Painting
FLEXIBLE FLOOR PLAN AND BUILDING DESIGN
- Floor plan can be mirror reversed during installation
- Windows marked red on the floor plan can be placed in your
preferred location during installation
If you need any changes to our standard range of cabins or wish to make your own design come to life, bring it on!
